Iron Man Mechanical Right-Hand 32mm Wire Rope Clip Clamp Lifting Machinery Tool

Why Wire Rope Clips Cannot Be Used Indiscriminately Without Distinguishing Left and Right

As is well known, the main purpose of wire rope clips is to fasten the ends of wire ropes. Typically, the outer layer of a wire rope consists of six strands twisted at an angle in a right-hand direction. However, not all wire ropes on the market are right-hand twisted; left-hand twisted ropes are now increasingly common. According to the national standard GB/T5976-2006 for wire rope clips, it is explicitly required that the surface of the wire rope must match the twist direction of the rope groove in the clip saddle. From this, it can be determined that if it is a left-hand twisted wire rope, a left-hand twisted wire rope clip must be selected to comply with usage specifications.

Due to cost factors in market competition, the majority of products on the market are primarily made of ordinary cast iron (also known as malleable iron). Market demand factors have not led to the availability of left-hand twisted rope clips. Some gray iron cast rope clips are even used for critical applications involving wire ropes. According to the national standard GB/T5976-2006 for wire rope clips, when wire rope clips are used on lifting machinery, it is recommended to use (national standard forged) wire rope clips for better performance. Tieren Machinery, based on customer needs, can provide wire rope clips in sizes ranging from 6mm to 60mm, fully meeting national standards for both left-hand and right-hand twisted specifications. The manufacturing process is forging, and the mechanical properties of the selected materials meet or exceed standard quality requirements. With the progress of the economic development era, standardized products are increasingly valued by users. Correct selection and standardized usage are becoming deeply ingrained.